TUE-16-INV-001 G.M. International s.r.l.
GM International

TUE-16-INV-001

16-pos Term. Unit for Foxboro AI card FBM211 & FBM214e

This Termination Unit with Enclosure (TUE) provides direct connection between the I/O Card of the system and the field terminals. It supports all types of analog current transmitters, 2-wire passive or active, as well as 3 or 4-wire field devices. HART® signals are transferred transparently between system and field in both directions. On-board voltage and current protections avoid damages due to unintentional short circuits. Redundant power supply with voltage monitoring is supported.

FEATURES

  • Foxboro AI Card board interface
  • 16 positions Termination Unit for up to 16 channels
  • Field terminals for 2-wire passive/active and 3/4-wire transmitters
  • HART® signal transparency
  • On-board voltage/current protections against unintentional short circuits
  • Lower cables installation and maintenance costs
  • Power supplies redundancy
  • Power supplies voltage monitoring
  • Single DIN Rail mounting

STATUS

 
   ACTIVE
Product lifecycle policy (EN)

Request a free and personalized quotation!

Technical Data


General

Maximum number of channels 16

Supply

Voltage 24 Vdc nom (20 to 30 Vdc), reverse polarity protected, redundant power supply, with OR diodes to mix supply voltages.
Max allowed current consumption 3 A (as total supply).
Connection by screw with terminations up to 2.5 mm².
Protection fuse 4 A time lag.
Voltage monitor contact closed if both power supplies are connected and active.

I/O Card Interface

Connection 1 x 37-pin D-sub male connector (require female mating connector).
Cable system cable Type 4.

Field Interface

Connection by screw with terminations up to 2.5 mm².
Max supply current per channel 250 mA.
Signal current range 0 to 25 mA.

Environmental conditions

Operating temperature temperature limits –40 to +70 °C.
Max altitude 2000 m a.s.l.
Storage temperature temperature limits –45 to +80 °C.

Mounting

Type Hardware included for mounting on single DIN-rail 35 mm.
Weight about 490 g.
Location installation in Safe Area.
Dimensions Width 140 mm, Depth 125 mm, Height 80 mm.

Data Sheet


Datasheet of TUE-16-INV-001 ( EN | DE | CN | FR | JA | IT | ES | PT )
Schneider Foxboro TB Summary ( EN | FR | JA | CN | PT | IT | ES | DE )

Instruction Manual


Instruction Manual Foxboro EcoStruxure (Evo) for TUE series ( EN )

Declarations of Conformity


EU Declaration Termination Boards TB, TBE, TUE ( EN )

Dimensions


Image of TUE-16-INV-001_size (Web)

Connections