D6031D

SIL 3 Switch/Proximity Detector Repeater Transistor Out

Description

The dual channel Switch/Proximity Detector Repeater D6031D module is a unit suitable for applications requiring SIL 3 level (according to IEC 61508:2010 Ed. 2) in safety related systems for high risk industries.
The unit can be configured for switch or proximity detector (EN60947-5-6, NAMUR), NO or NC and for NO or NC optocoupled open collector transistor output.
Each channel enables a load to be controlled by a switch, or a proximity detector.
Fault detection circuit (DIP switch configurable) is available for both proximity sensor and switch equipped with end of line resistors. In case of fault, when enabled it de-energizes the corresponding output transistor and turns the fault LED on; when disabled the corresponding output transistor repeats the input line open or closed status as configured.
D6031D is programmable via dip switches as single input and two independent outputs.
Out 2 can be programmed for output duplicating Out 1 or fault detection Out.
In case of duplication, transistor driving can be independently configured for each output.
In case of fault output, transistor driving can be programmed as normally closed (NC) or normally open (NO).
Mounting on standard DIN-Rail, with or without Power Bus, or on customized Termination Boards.

Features

• Systematic capability SIL 3.
• 2 fully independent channels.
• NO/NC switch/proximity Detector Input, NO/NC transistor driving mode.
• Field open and short circuit detection.
• Three port isolation, Input/Output/Supply.
• EMC Compatibility to EN61000-6-2, EN61000-6-4, EN61326-1, EN61326-3-1 for safety system.
• In-field programmability by DIP Switch.
• High Density, two channels per unit.
• Simplified installation using standard DIN-Rail and plug-in terminal blocks, with or without Power Bus, or customized Termination Boards.

Supply

18-30 Vdc

Channels

2 (1 Channel: D6031S )

SIL level

SIL 3
Image of D6031D (WEB)

Download

    Instruction Manual D6031 ( EN )
    Safety Manual D6031 ( EN )
    EAC_EMC > EAC > D5000/D6000 EAC EMC Declaration of Conformity ( RU )
    QMS_FS > TUV_SUD > TUV C-IS-236198-09 Functional Safety Certificate ( EN )
    SIL > GMI > TUV C-IS-722134640-01 SIL Certificate Summary ( EN )
    EU Declaration of Conformity for RoHS, ASBESTOS. ( EN )
    EU Declaration of Conformity for D6000 series ( EN | IT )
    Declaration of Conformity G3 compliance ( EN )
    JDFT04912mm DIN Rail Connector
    MCHP196Power Bus Terminal Block Cover and Fix
    MOR017Plug-in Terminal Block male, Horizontal Output, for Bus Power
    MOR022Plug-in Terminal Block female, Horizontal Output, for Bus Power

Status

AVAILABLE
> Product lifecycle policy ( EN )

 

Request a quotation

« Previous: D6030S
D6031D
Next: D6031S »