D6020D

SIL 2 Powered Isolating Driver Hart

Description

The dual channel Isolating Driver D6020D module is a high integrity analog output interface suitable for applications requiring SIL 2 level (according to IEC 61508:2010 Ed. 2) in safety related systems for high risk industries.
It isolates and transfers a 4-20 mA signal from a controller to a load up to 700 Ω. It has a high output capacity of 15 V at 20 mA combined with a low drop across its input terminals.
The circuit allows bi-directional communication signals, for Hart positioner.
In the 4-20 mA input range, a field open or short circuit, reflects a high impedance to the control device circuit and actuates (de-energizes) the channel fault output transistor and actuates (energizes) the cumulative fault output available on Power Bus connector.
A fault output signal for each channel is available when mounted on customized Termination Board. In addition the single channel D6020S provides open collector transistor output on terminal blocks.
Short circuit fault detection can be enabled (two different levels can be selected) or disabled via DIP-Switch programming.
Mounting on standard DIN-Rail, with or without Power Bus, or on customized Termination Boards.

Features

• Systematic capability SIL 3
• 2 fully independent channels.
• 4-20 mA Input, Output Signal.
• Hart compatible.
• Field open and short circuit detection and signaling for each channel and cumulative.
• High Accuracy.
• Three port isolation, Input/Output/Supply.
• EMC Compatibility to EN61000-6-2, EN61000-6-4, EN61326-1, EN61326-3-1 for safety system.
• In-field programmability by DIP Switch.
• High Density, two channels per unit.
• Simplified installation using standard DIN-Rail and plug-in terminal blocks, with or without Power Bus, or customized Termination Boards.

Supply

18-30 Vdc

Channels

2 (1 Channel: D6020S )

SIL level

SIL 2
Image of D6020D (WEB)

Download

    Instruction Manual D6020 ( EN | RU )
    Safety Manual D6020 ( EN )
    BELARUS_METROLOGICAL > ROSSTANDART > Metrological Certificate Belarus for D5000/D6000 Series ( BE )
    EAC_EMC > EAC > D5000/D6000 EAC EMC Declaration of Conformity ( RU )
    KAZAKH_METROLOGICAL > GMI > Metrological Certificate Kazakhstan for D5000/D6000 series ( KK | RU )
    QMS_FS > TUV_SUD > TUV C-IS-236198-09 Functional Safety Certificate ( EN )
    RUSSIA_METROLOGICAL > ROSSTANDART > Metrological Certificate Russia for D5000/D6000 series ( RU )
    SIL > TUV_SUD > TUV C-IS-722134640-01 SIL Certificate Summary ( EN )
    EU Declaration of Conformity for RoHS, ASBESTOS. ( EN )
    EU Declaration of Conformity for D6000 series ( EN | IT )
    Declaration of Conformity G3 compliance ( EN )
    JDFT04912mm DIN Rail Connector
    MCHP196Power Bus Terminal Block Cover and Fix
    MOR017Plug-in Terminal Block male, Horizontal Output, for Bus Power
    MOR022Plug-in Terminal Block female, Horizontal Output, for Bus Power

Status

AVAILABLE
> Product lifecycle policy ( EN )

 

Request a quotation

« Previous: D6017SS
D6020D
Next: D6020S »