Flammable Liquid Presence Detector Interface Relay Output


The Flammable Liquid Presence Detector Interface type D1180D is a DIN Rail unit configurable with two isolated independent channels. The unit can be configured for NPN or PNP transistor type input, NO or NC and for NE or ND SPDT relay output. Each channel enables a Safe Area load to be controlled by 3 wires opto-electronic sensors or 3 wires proximity sensors located in Hazardous Area.


• Input from Zone 0 (Zone 20).
• Universal AC supply voltage (85 to 264 Vac or 100 to 350 Vdc).
• Dual channel Flammable Liquid Presence Detector Interface Input.
• NPN/PNP 3 wires proximity Detector Input.
• Two SPDT Relay Output Signals.
• Three port isolation, Input/Output/Supply.
• EMC Compatibility to EN61000-6-2, EN61000-6-4.
• In-field programmability by DIP Switch.
• High Reliability, SMD components.
• High Density, two channels per unit.
• Simplified installation using standard DIN Rail and plug-in terminal blocks.
• 250 Vrms (Um) max. voltage allowed to the instruments associated with the barrier.


115-230 Vac, 50-60 Hz nom (85 to 250 Vac, 48 to 400 Hz)


D1180D - Flammable Liquid Presence Detector Interface Relay Output


    DTS0180 D1180D data sheet (English) (PDF 213 KB)
    ISM0057D1180D instruction manual (PDF 725 KB)
    ISM0102General D1000 Series Instruction Manual (PDF 2.65 MB)
    ISM0155General D1000 Series Safety Instruction Manual (PDF 4.62 MB)
    CRT003ATEX certificate n. DMT 01 ATEX E 042 X (I.S.) (PDF 10.99 MB)
    CRT028Korean Register Type Approval Certificate (PDF 245 KB)
    CRT032IECEx CoC for D1000 Series (I.S.) [link IECEx BVS 07.0027X] (PDF 2.80 MB)
    CRT047ATEX certificate n. IMQ 09 ATEX 013 X (non-sparking) (PDF 364 KB)
    CRT125IECEx CoC for D1000 Series (non-sparking) [link IECEx IMQ 13.0011X] (PDF 191 KB)
    CRT175INMETRO Certificate DNV 13.0108X (PDF 688 KB)
    CRT192EAC Ex Certificate for D1000 Series (PDF 3.15 MB)
    CRT216Ukraine certificate for D1000 series (PDF 3.50 MB)
    CRT318DNV Maritime Type Approval Certificate (D1000 Series) (PDF 1.78 MB)
    MOR015Plug-in Terminal Block male, Vertical output, for Power Bus
    MOR016DIN Rail End Stopper Terminal Block


Request a quotation

« Previous: D1130S
Next: D2010M »