D5062S G.M. International s.r.l.
GM International

  • Search
  • RESERVED AREA
    Lost Password
    Not registered yet?
    Sign up

D5062S

  1. Products
  2. Intrinsically Safe Isolators
  3. Vibration Transducer Input
D5062S
I.S. SIL2 Vibration Transducer Interface

The Vibration Transducer Interface D5062S is a high integrity analog input interface suitable for applications requiring SIL 2 level in safety related systems for high risk industries. It provides a fully floating dc supply for energizing vibration transducers, accelerometers or 2-3 wires sensors located in Hazardous Area, and repeats the sensor input voltage in a totally isolated circuit located in Safe Area to drive vibration monitors or analyzers for rotating machinery control and supervision purposes.

FEATURES

  • SIL 2 / SC 3
  • Input from Zone 0/Div. 1
  • Installation in Zone 2/Div. 2
  • 0 to –20 V Input/Output Signal
  • Wide band signal transfer
  • Input and Output short circuit proof
  • In-field programmability by DIP Switch
  • High Accuracy
  • Three port isolation, Input/Output/Supply

Discover D5000


STATUS

 
   ACTIVE
Product lifecycle policy (EN)

CHANNELS

1

Request a free and personalized quotation!

Contact us

Technical Data


Supply
Voltage 24 Vdc nom (18 to 30 Vdc), reverse polarity protected.
Current Consumption 90 mA @ 24 Vdc with 20 mA transducer consumption and 2 mA output load, typical.
Power Dissipation 2.0 W @ 24 Vdc with 20 mA transducer consumption and 2 mA output load, typical.

Input
Type 0 V to -20 V (10 kΩ impedance at terminals 7-8 or 8-9).
3 wires sensor supply voltage more than -22 V @ 0 mA supply, more than -17 V @ 15 mA supply (current limited @ ≈ 23 mA).
2 wires sensor supply voltage more than -17 V with constant current supply.
2 wires sensor supply current selectable @ 4 mA, 6 mA or 10 mA via internal DIP–Switch.

Output
Type 0 to -20 V on 10 kΩ load, with 10 Ω output resistance.
Response time ≤ 10 µs (10 to 90 % step change).
Frequency response DC to 20 kHz within 1 dB maximum.

Performance
Ref. Conditions 24 V supply, 10 kΩ load, 23 ± 1 °C ambient temperature
Calibration accuracy ≤ ± 0.1 % FSR
Linearity accuracy ≤ ± 0.05 % FSR
Temp. influence ≤ ± 0.005 % on zero/span for a 1 °C change.

Isolation
Test Voltage I.S. In/Out 1.5 kV; I.S. In/Supply 1.5 kV; Out/Supply 500 V

Environmental conditions

Operating temperature temperature limits –40 to +70 °C
Storage temperature temperature limits –45 to +80 °C

Safety description
Equipment Associated apparatus and non-sparking electrical equipment
Safety parameters Uo = 27 V, Io = 90 mA, Po = 576 mW at terminals 7-8-9-10. Ui = 30 V, Ci = 0 nF, Li = 0 nH at terminals 7-8-9. Um = 250 Vrms or Vdc, -40 °C ≤ Ta ≤ 70 °C.

Mounting
Type DIN-Rail 35 mm, with or without Power Bus or on custom Term. Board.
Weight about 125 g.
Connection by polarized plug-in disconnect screw terminal blocks to accomodate terminations up to 2.5 mm² (13 AWG).
Dimensions Width 12.5 mm, Depth 123 mm, Height 120 mm.

Data Sheet


Datasheet of D5062 ( EN | RU | FR | DE | ES | IT | CN | JA | PT )
D5000 Series Common Specifications and Dimensional Drawing ( EN )

Instruction Manual


Instruction Manual D5062 ( EN | CN )
EAC Passport of D5062 ( RU )
Instruction Manual D5000-D5200 Series ( EN )
ATEX safety instruction manual for D5000 series ( EN | IT )
CCC Ex safety instruction manual for D5000 series ( EN | CN )
Ex safety instruction manual for D5000 series ( RU )
UL Control Drawing D5062 ( EN )

Certifications


Type Description Area Number Issued by Issue Date
ATEX UL ATEX D5062 Series English Certificate ( EN ) Europe UL 21 ATEX 2562X UL 2023-10-19
EMC D5000/D6000 EAC EMC Declaration of Conformity ( RU ) Eurasian Community ЕАЭС N RU Д-IT.АЖ38.В.00126/19 EUROCERT 2019-05-31
Ex D5000 CCC certificate for China ( EN ) China 2020322316000978 NEPSI 2024-03-22
Ex EAC Ex Certificate for D5000 Series ( RU ) Eurasian Community ЕАЭС RU С-IT.ЕХ01.В.00018/19 CCVE 2019-04-25
Ex Emirates Certificate of Conformity D5062 series ( EN ) United Arab Emirates 23-10-90269/E23-10-092692/NB0002 SGS 2023-10-31
Ex UL-cUL D5062 Divisions and Zones ( EN ) North America E222308-20181210 UL 2021-12-13
Ex TIIS D5062S Certificate ( JA ) Japan TC22332 TIIS 2024-03-07
FSM TUV IT 22 SIL 0093 Functional Safety Certificate ( EN ) International TUV IT 22 SIL 0093 TUV_SUD 2022-07-25
IECEx UL IECEx D5062 Series English Certificate ( EN ) International IECEx ULD 21.0018X UL 2023-10-19
Maritime KR Maritime Certificate D5000 Series ( EN ) International MIL20769-EL002 KR 2020-10-12
Metrological Metrological Certificate Belarus for D5000/D6000 Series ( BE ) Belarus 15507 ROSSTANDART 2022-08-30
Metrological Metrological Certificate Kazakhstan for D5000/D6000 series ( KK ) Kazakhstan 1152 KMC 2021-08-05
Metrological Metrological Certificate Russia for D5000/D6000 series ( RU ) Russia OC.C.32.004.A n. 77881 ROSSTANDART 2020-07-28
SIL TUV C-IS-224248-01 SIL Certificate Summary ( EN ) International C-IS-224248-01 TUV_SUD 2022-10-14

Declarations of Conformity


EU Declaration of Conformity for D5062 ( EN | IT )
EU Declaration of Conformity for RoHS, ASBESTOS. ( EN )
Declaration of Conformity G3 compliance ( EN )

Dimensions


Image of D5062_size

Connections


Drawings


2d_drawing_D5000_dwg ( EN )

ACCESSORIES


JDFT049

JDFT049

OPT5096

OPT5096