D1053S

1 Ch, Analog Signal Converter and Trip Amplifier, SIL 2

Description

The single channel DIN Rail Analog Signal Converter and Trip Amplifier D1053S accepts a voltage or current input from externally powered transmitters, located in Hazardous Area, and converts, with isolation, the signal to drive a Safe Area load. Output signal can be direct or reverse. Two independent Alarm Trip Amplifiers are also provided. Each alarm energizes, or de-energizes, an SPST relay for high, low, low-startup or burnout alarm functions. The two alarm relays trip points are settable over the entire input signal range.

Features

• Input from Zone 0 (Zone 20), Division 1, installation in Zone 2, Division 2.
• 0/4-20 mA, 0/1-5 V, 0/2-10 V Input-Output Signal linear or reverse.
• Two independent trip amplifiers.
• Output for burnout detection.
• High Accuracy, μP controlled A/D converter.
• Three port isolation, Input/Output/Supply.
• EMC Compatibility to EN61000-6-2, EN61000-6-4.
• Fully programmable operating parameters.
• High Reliability, SMD components.
• High Density, one channel, 2 trips per unit.
• Simplified installation using standard DIN Rail and plug-in terminal blocks.
• 250 Vrms (Um) max. voltage allowed to the instruments associated with the barrier.

Supply

20-30 Vdc

Channels

1

SIL level

SIL 2
Image of D1053S (Web)

Download

    Datasheet of D1053 ( EN )
    D1000 Series Common Specifications and Dimensional Drawing ( EN )
    Instruction Manual D1053 ( EN )
    Instruction Manual for SIL Related Barrier ( EN )
    Instruction Manual D1000 Series ( EN )
    UL Control Drawing D1053 ( EN )
    D1052-53-54-60-72-73 Sink Mode Current Output ( EN )
    PSD1000 Supply for D1000 Series AC Input ( EN )
    D1053S 4 Channel Level or Pressure Alarm System ( EN )
    ATEX > IMQ > IMQ Zone 2 Applications D1000 Series Certificate ( EN )
    ATEX > DEKRA > ATEX D1000 Series Certificate ( EN | DE )
    EAC_EMC > EAC > D1000 EAC EMC Declaration of Conformity ( RU )
    EAC_EX > TECHNOPROGRESS > EAC Ex Certificate for D1000 Series ( RU )
    HAZARDOUS_LOCATION > FM > FM No.3024643-3029921C Certificate ( EN )
    IECEX > IMQ > IMQ IECEx Zone 2 Applications D1000 Series Certificate ( EN )
    IECEX > DEKRA > DEKRA IECEx for D1000 Series ( EN )
    INMETRO_EX > DNV-GL > INMETRO Certificate DNV 13.0108 X for D1000 series ( EN )
    MARITIME > DNV-GL > DNV Maritime Certificate TAA00002BM for D1000 Series ( EN )
    MARITIME > KR > KR Maritime Certificate D1000 Series ( EN )
    RUSSIA_METROLOGICAL > ROSSTANDART > Metrological Certificate Russia for D1000 Series ( RU )
    SIL > EXIDA > EXIDA GM 04/10-27 Analisys for SIL Application D1000 Series ( EN )
    UKRAINE_EX > SERTIS-CENTER > Ukraine Techincal Regulation n. 898 certificate D1000 series ( UK )
    EU Declaration of Conformity D1000 series ( EN )
    EU Declaration of Conformity for D1000 series (zone 2) ( EN )
    EU Declaration of Conformity for RoHS, REACh ( EN )
    Declaration of G3 compliance for D1000_PSD1000-PSD1001-PSD1001C-PSD1004-PSD1220-PSD1220-098 SERIES ( EN )
    Product Overview ( EN | FR | DE | CN | RU | JA )
    D1000 Series Presentation ( RU )
    2D_drawing_D1000_dwg ( EN )
    3D_drawing_D1000_dwg ( EN )
    3D_drawing_D1000_stp ( EN )
    SWC1090-D1000 and E1000 Software Configurator for Windows ( Download )
    Driver of USBADAPTER ( Download )
    MCHP065Din Rail Anchor, for Terminal Block Side of Bus Power
    MOR016DIN Rail End Stopper Terminal Block
    MOR017Plug-in Terminal Block male, Horizontal Output, for Bus Power
    MOR022Plug-in Terminal Block female, Horizontal Output, for Bus Power
    PPC1090Pocket Portable Configurator for D105* D106* D107*
    PPC1092D1000 Series Serial Adapter Configurator.

 

Request a quotation

« Previous: D1052Y
D1053S
Next: D1054S »