D6031D

SIL 2 Switch/Proximity Detector Repeater Transistor Out, DIN-Rail & Term. Board

Description

The channel Switch/Proximity Detector Repeater, D6031D module is a unit suitable for applications requiring SIL 2 level (according to IEC 61508) in safety related systems for high risk industries. The unit can be configured for switch or proximity detector (EN60947-5-6, NAMUR), NO or NC and for NO or NC optocoupled open collector transistor output.
Each channel enables a load to be controlled by a switch, or a proximity detector.
Fault detection circuit (DIP switch configurable) is available for both proximity sensor and switch equipped with end of line resistors. In case of fault, when enabled it de-energizes the corresponding output transistor and turns the fault LED on; when disabled the corresponding output transistor repeats the input line open or closed status as configured.
D6031D is programmable via dip switches as single input and two independent outputs.
Out 2 can be programmed for output duplicating Out 1 or Fault detection Out.
In case of duplication, transistor driving can be independently configured for each output.
In case of fault output, transistor driving can be programmed as normally close or normally open.
Mounting on standard DIN-Rail, with or without Power Bus, or on customized Termination Boards.

Features

• 2 fully independent channels
• NO/NC switch/proximity Detector Input, NO/NC transistor driving mode.
• Field open and short circuit detection.
• Three port isolation, Input/Output/Supply.
• EMC Compatibility to EN61000-6-2, EN61000-6-4, EN61326-1, EN61326-3-1 for safety system.
• In-field programmability by DIP Switch.
• High Density, two channels per unit.
• Simplified installation using standard DIN-Rail and plug-in terminal blocks, with or without Power Bus, or customized Termination Boards.

Channels

2 (1 Channel: D6031S)

SIL level

SIL 2
D6031D - SIL 2 non I.S. Switch/Proximity Detector Repeater Transistor Out

request a quotation

Download

    DTS0466 D6031D data sheet (English) (PDF 292 KB)
    ISM0214D6031D instruction manual (PDF 720 KB)
    JDFT04912mm DIN Rail Connector
    MCHP196Power Bus Terminal Block Cover and Fix
    MOR017Plug-in Terminal Block male, Horizontal Output, for Bus Power
    MOR022Plug-in Terminal Block female, Horizontal Output, for Bus Power
Are you interested in this product? Request a quotation, search for an expert in your area or contact us.

« Previous: D6030S
D6031D
Next: D6031S »