D5231E

SIL 2 Switch/Proximity Detector Repeater, 8 channels, Transistor Output

Description

The Switch/Proximity Detector Repeater type D5231E is a unit with eight independent channels suitable for applications requiring SIL 2 level (according to IEC 61511) in safety related systems for high risk industries. The unit can be configured for switch or proximity detector (EN60947-5-6 NAMUR), NO or NC input and for NO or NC floating solid-state relay (photo-MOS) isolated output compatible with logic circuits. Configuration is programmable from PC by the GM Pocket Portable Adapter PPC5092 via USB serial line and SWC5090 Configurator software. Each channel enables a Safe Area load to be controlled by a switch, or a proximity detector, located in Hazardous Area.
Fault detection circuit (configurable by PC) is available for all proximity sensors and switches equipped with end of line resistors. In case of fault, when enabled it de-energizes the corresponding solid-state relay (photo-MOS) and turns the fault red LED on; when disabled the corresponding solid-state relay (photo-MOS) repeats the input line open or closed status as configured. D5231E has eight inputs and eight independent outputs.
Modbus RTU RS-485 output is available on Bus connector.

Mounting on standard DIN-Rail, with or without Power Bus, or on customized Termination Boards, in Safe Area / Non Hazardous Location or in Zone 2 / Class I, Division 2 or Class I, Zone 2.

Features

• 8 fully independent channels
• Input from Zone 0 (Zone 20), installation in Zone 2.
• NO/NC switch/proximity Detector Input, NO/NC solid-state output relay .
• Field open and short circuit detection.
• High Accuracy, μP controlled A/D converter.
• Three port isolation, Input/Output/Supply.
• Modbus RTU RS-485 Output.
• EMC Compatibility to EN61000-6-2, EN61000-6-4, EN61326-1, EN61326-3-1 for safety system.
• Fully programmable operating parameters.
• Any input can be assigned to any number of outputs. Logical output functions available.
• High Density, eight channels per unit.
• Simplified installation using standard DIN-Rail and plug-in terminal blocks, with or without power Bus, or customized Termination Boards.
• 250 Vrms (Um) max. voltage allowed to the instruments associated with the barrier.

Supply

24 Vdc nom (18 to 30 Vdc)

Channels

8

SIL level

SIL 2
D5231E - SIL 2 Switch/Proximity Detector Repeater

request a quotation

Download

    DTS0329 D5231E data sheet (English) (PDF 544 KB)
    ISM0154SWC5090 Instruction Manual (PDF 5.57 MB)
    ISM0172D5231E instruction manual (PDF 930 KB)
    ISM0121D5000-D5200 Series General Instruction Manual (PDF 3.27 MB)
    ISM0167FM Control Drawing for D5231E (PDF 143 KB)
    ISM0156D5000 Series Safety Instruction Manual (PDF 5.24 MB)
    CRT104ATEX certificate n. BVS 12 ATEX E 122 X (PDF 3.65 MB)
    CRT107IECEx CoC for D5231E [link IECEx BVS 12.0090X] (PDF 992 KB)
    CRT110FM 3046304 (USA) & FM-C 3046304C (Canada) for D5000 Series (PDF 314 KB)
    CRT122INMETRO Certificate DNV 13.0106 X (PDF 435 KB)
    CRT126DNV Maritime Type Approval Certificate (D5000 Series) (PDF 1.68 MB)
    CRT136TRCU Certificate for D5000 Series (PDF 1.35 MB)
    CRT142TÜV SIL Certificate Summary (PDF 919 KB)
    CRT153Korean Register Type Approval Certificate (PDF 1.22 MB)
    CRT169NEPSI cert. no. GYJ14.1406X (PDF 6.93 MB)
    CRT218Ukraine certificate for D5000 series (PDF 2.80 MB)
    SWC5090D5000/D6000 Software Configurator for Windows
    JDFT05022mm DIN Rail Connector
    MCHP196Power Bus Terminal Block Cover and Fix
    MOR017Plug-in Terminal Block male, Horizontal Output, for Bus Power
    MOR022Plug-in Terminal Block female, Horizontal Output, for Bus Power
    PPC5092D5000 Series Adapter for Configuration
Are you interested in this product? Request a quotation, search for an expert in your area or contact us.

« Previous: D5202S
D5231E
Next: D5240T »