D5031D

SIL 3 Switch/Proximity Detector Repeater Transistor Output

Description

The dual channel Switch/Proximity Detector Repeater, D5031D module, is a unit suitable for applications requiring SIL 3 level (according to IEC 61508:2010 Ed. 2) in safety related systems for high risk industries.
The unit can be configured for switch or proximity detector (EN60947-5-6, NAMUR), NO or NC and for NO or NC optocoupled open collector transistor output.
Each channel enables a Safe Area load to be controlled by a switch, or a proximity detector, located in Hazardous Area.
Fault detection circuit (DIP switch configurable) is available for proximity sensor and switch equipped with end of line resistors. In case of fault, when enabled it de-energizes the corresponding output transistor and turns the fault LED on; when disabled the corresponding output transistor repeats the input line open or closed status as configured.

D5031D is programmable via dip switches as single input and two independent outputs.
Out 2 can be programmed for output duplicating Out 1 or fault detection Out.
In case of duplication, transistor driving can be independently configured for each output.
In case of fault output, transistor driving can be programmed as normally closed (NC) or normally open (NO).

Mounting on standard DIN-Rail, with or without Power Bus, or on customized Termination Boards, in Safe Area / Non Hazardous Location or in Zone 2 / Class I,Division 2 or Class I, Zone 2.

Features

• Systematic capability SIL 3
• 2 fully independent channels.
• Input from Zone 0 (Zone 20) / Division 1, installation in Zone 2 / Division 2.
• NO/NC switch/proximity Detector Input,NO/NC transistor driving mode.
• Field open and short circuit detection.
• Three port isolation, Input/Output/Supply.
• EMC Compatibility to EN61000-6-2, EN61000-6-4,EN61326-1, EN61326-3-1 for safety system.
• In-field programmability by DIP Switch.
• High Density, two channels per unit.
• Simplified installation using standard DIN-Rail and plug-in terminal blocks, with or without Power Bus, or customized Termination Boards.
• 250 Vrms (Um) max. voltage allowed to the instruments associated with the barrier.

Supply

24 Vdc nom (18 to 30 Vdc)

Channels

2 (1 Channel: D5031S)

SIL level

SIL 3
D5031D - SIL 3 Switch/Proximity Detector Repeater

request a quotation

Download

    DTS0283 D5031D data sheet (English) (PDF 397 KB)
    ISM0107D5031D instruction manual (PDF 700 KB)
    ISM0121D5000-D5200 Series General Instruction Manual (PDF 3.27 MB)
    ISM0161FM Control Drawing for D5030S, D5030D, D5031S, D5031D, D5032S, D5032D (PDF 141 KB)
    ISM0156D5000 Series Safety Instruction Manual (PDF 5.24 MB)
    ISM0275UL Control Drawing for D5030S/D, D5031S/D, D5032S/D (PDF 84 KB)
    ISM0364D5031S/D safety manual (PDF 489 KB)
    CRT005UL & C-UL barriers listing [link E222308] (PDF 227 KB)
    CRT058ATEX certificate n. BVS 10 ATEX E 113 X (PDF 4.61 MB)
    CRT062IECEx CoC for D5000 Series [link IECEx BVS 10.0072X] (PDF 8.31 MB)
    CRT084Metrological Certificate for D5000 Series (Russia) (PDF 2.13 MB)
    CRT110FM 3046304 (USA) & FM-C 3046304C (Canada) for D5000 Series (PDF 314 KB)
    CRT126DNV Maritime Type Approval Certificate (D5000 Series) (PDF 1.68 MB)
    CRT127INMETRO Certificate DNV 13.0109 X (PDF 619 KB)
    CRT128TÜV SIL Certificate Summary (PDF 1.97 MB)
    CRT130TÜV SIL Functional Safety Certificate (PDF 65 KB)
    CRT136TRCU Certificate for D5000 Series (PDF 1.35 MB)
    CRT153Korean Register Type Approval Certificate (PDF 1.22 MB)
    CRT169NEPSI cert. no. GYJ14.1406X (PDF 6.93 MB)
    CRT218Ukraine certificate for D5000 series (PDF 2.80 MB)
    JDFT04912mm DIN Rail Connector
    MCHP196Power Bus Terminal Block Cover and Fix
    MOR017Plug-in Terminal Block male, Horizontal Output, for Bus Power
    MOR022Plug-in Terminal Block female, Horizontal Output, for Bus Power
Are you interested in this product? Request a quotation, search for an expert in your area or contact us.

« Previous: D5030S
D5031D
Next: D5031S »