D5020S

SIL 2 Powered Isolating Driver Hart

Description

The single channel Isolating Driver, D5020S module is a high integrity analog output interface suitable for applications requiring SIL 2 level (according to IEC 61508:2010 Ed. 2) in safety related systems for high risk industries. It isolates and transfers a 4-20 mA signal from a controller located in Safe Area to a load up to 700 Ω in Hazardous Area. It has a high output capacity of 15 V at 20 mA combined with a low drop across its input terminals.
The circuit allows bi-directional communication signals, for Hart positioner.
In the 4-20 mA input range, a field open or short circuit, reflects a high impedance to the control device circuit and actuates (de-energizes) the channel fault output transistor and actuates (energizes) the cumulative fault output available on Power Bus connector. A fault output signal for each channel is available when mounted on customized Termination Board. In addition the single channel D5020S provides open collector transistor output on terminal blocks.
Short circuit fault detection can be enabled (two different levels can be selected) or disabled via DIP-Switch programming.

Mounting on standard DIN-Rail, with or without Power Bus, or on customized Termination Boards, in Safe Area / Non Hazardous Location or in Zone 2 / Class I, Division 2 or Class I, Zone 2.

Features

• Systematic capability SIL 3
• Output to Zone 0 (Zone 20) / Division 1, installation in Zone 2 / Division 2.
• 4-20 mA Input, Output Signal.
• Hart compatible.
• Field open and short circuit detection and signaling for each channel and cumulative.
• High Accuracy.
• Three port isolation, Input/Output/Supply.
• EMC Compatibility to EN61000-6-2, EN61000-6-4, EN61326-1, EN61326-3-1 for safety system.
• In-field programmability by DIP Switch.
• High Density, two channels per unit.
• Simplified installation using standard DIN-Rail and plug-in terminal blocks, with or without Power Bus, or customized Termination Boards.
• 250 Vrms (Um) max. voltage allowed to the instruments associated with the barrier.

Supply

24 Vdc nom (18 to 30 Vdc)

Channels

1 (2 channels: D5020D)

SIL level

SIL 2
D5020S - SIL 2 Powered Isolating Driver Hart Compatible

request a quotation

Download

    DTS0281 D5020S data sheet (English) (PDF 445 KB)
    ISM0118D5020S instruction manual (PDF 736 KB)
    ISM0121D5000-D5200 Series General Instruction Manual (PDF 3.27 MB)
    ISM0160FM Control Drawing for D5020S, D5020D (PDF 132 KB)
    ISM0156D5000 Series Safety Instruction Manual (PDF 5.24 MB)
    ISM0274UL Control Drawing for D5020S, D5020D (PDF 83 KB)
    CRT005UL & C-UL barriers listing [link E222308] (PDF 227 KB)
    CRT058ATEX certificate n. BVS 10 ATEX E 113 X (PDF 4.61 MB)
    CRT062IECEx CoC for D5000 Series [link IECEx BVS 10.0072X] (PDF 8.31 MB)
    CRT084Metrological Certificate for D5000 Series (Russia) (PDF 2.13 MB)
    CRT110FM 3046304 (USA) & FM-C 3046304C (Canada) for D5000 Series (PDF 314 KB)
    CRT126DNV Maritime Type Approval Certificate (D5000 Series) (PDF 1.68 MB)
    CRT127INMETRO Certificate DNV 13.0109 X (PDF 619 KB)
    CRT128TÜV SIL Certificate Summary (PDF 1.97 MB)
    CRT130TÜV SIL Functional Safety Certificate (PDF 65 KB)
    CRT136TRCU Certificate for D5000 Series (PDF 1.35 MB)
    CRT153Korean Register Type Approval Certificate (PDF 1.22 MB)
    CRT169NEPSI cert. no. GYJ14.1406X (PDF 6.93 MB)
    CRT185TIIS Certificate for D5020 (PDF 1.31 MB)
    CRT218Ukraine certificate for D5000 series (PDF 2.80 MB)
    CRT253Metrological Certificate for D5000/D6000 Series (Belarus) (PDF 1.80 MB)
    JDFT04912mm DIN Rail Connector
    MCHP196Power Bus Terminal Block Cover and Fix
    MOR017Plug-in Terminal Block male, Horizontal Output, for Bus Power
    MOR022Plug-in Terminal Block female, Horizontal Output, for Bus Power
Are you interested in this product? Request a quotation, search for an expert in your area or contact us.

« Previous: D5020D
D5020S
Next: D5030D »