Flammable Liquid Presence Detector Interface Transistor Output


The Flammable Liquid Presence Detector Interface type D1081D is a DIN Rail unit configurable with two isolated independent channels. The unit can be configured for NPN or PNP transistor type input, NO or NC and for NC or NO optocoupled open-collector transistor output. Each channel enables a Safe Area load to be controlled by 3 wires opto-electronic sensors or 3 wires proximity sensors located in Hazardous Area.


• Input from Zone 0 (Zone 20).
• Dual channel Flammable Liquid Presence Detector Interface Input.
• NPN/PNP 3 wires proximity Detector Input.
• Two opto isolated voltage free Transistor Output Signals.
• Three port isolation, Input/Output/Supply.
• EMC Compatibility to EN61000-6-2, EN61000-6-4.
• In-field programmability by DIP Switch.
• High Reliability, SMD components.
• High Density, two channels per unit.
• Simplified installation using standard DIN Rail and plug-in terminal blocks.
• 250 Vrms (Um) max. voltage allowed to the instruments associated with the barrier.


15-24 Vdc nom (14 to 30 Vdc)


D1081D - Flammable Liquid Presence Detector Interface Transistor Output

request a quotation


    DTS0179 D1081D data sheet (English) (PDF 209 KB)
    ISM0056D1081D instruction manual (PDF 344 KB)
    ISM0102General D1000 Series Instruction Manual (PDF 2.39 MB)
    ISM0155General D1000 Series Safety Instruction Manual (PDF 3.35 MB)
    CRT003ATEX certificate n. DMT 01 ATEX E 042 X (I.S.) (PDF 9.52 MB)
    CRT028Korean Register Type Approval Certificate (PDF 577 KB)
    CRT032IECEx CoC for D1000 Series (I.S.) [link IECEx BVS 07.0027X] (PDF 2.80 MB)
    CRT047ATEX certificate n. IMQ 09 ATEX 013 X (non-sparking) (PDF 160 KB)
    CRT125IECEx CoC for D1000 Series (non-sparking) [link IECEx IMQ 13.0011X] (PDF 60 KB)
    CRT175INMETRO Certificate DNV 13.0108X (PDF 843 KB)
    CRT179DNV Maritime Type Approval Certificate (D1000 Series) (PDF 2.06 MB)
    CRT192TRCU Certificate for D1000 Series (PDF 3.15 MB)
    CRT216Ukraine certificate for D1000 series (PDF 3.50 MB)
    APN0007Universal AC Power Supply for Series D1000 (PDF 44 KB)
    BUSPower Bus Optional Enclosure
    MCHP065Din Rail Anchor, for Terminal Block Side of Bus Power
    MOR015Plug-in Terminal Block male, Vertical output, for Power Bus
    MOR016DIN Rail End Stopper Terminal Block
    MOR017Plug-in Terminal Block male, Horizontal Output, for Bus Power
    MOR022Plug-in Terminal Block female, Horizontal Output, for Bus Power
Are you interested in this product? Request a quotation, search for an expert in your area or contact us.

« Previous: D1080D
Next: D1092D »