D1054S

1 Ch, 0/4-20 mA TX Repeater, Power Supply, and Trip Amplifier

Description

The single channel DIN Rail Repeater Power Supply and Trip Amplifier D1054S, provides a fully floating dc supply for energizing conventional 2 wires 4-20 mA transmitters, or separately powered 3, 4 wires 4-20, 0-20 mA transmitters located in Hazardous Area, and repeats the current in floating circuit to drive a Safe Area load. Output signal can be direct or reverse. The circuit allows bi-directional communication signals, for Hart-Smart transmitters. Two independent Alarm Trip Amplifiers are also provided. Each alarm energizes, or de-energizes, an SPST relay for high, low, low-startup or burnout alarm functions. The two alarm relays trip points are settable over the entire input signal range.

Features

• Input from Zone 0 (Zone 20), Division 1, installation in Zone 2, Division 2.
• 4-20 mA loop or 0/4-20 mA externaly powered Input Signal.
• 0/4-20 mA, 0/1-5 V, 0/2-10 V Output Signal linear or reverse.
• Wide Band Smart Communication, Hart compatible.
• Input and Output short circuit proof.
• Two independent trip amplifiers.
• Output for burnout detection.
• Common burnout detection available when using Power Bus enclosure.
• High Accuracy, μP controlled A/D converter.
• Three port isolation, Input/Output/Supply.
• EMC Compatibility to EN61000-6-2, EN61000-6-4, EN61326-1
• Fully programmable operating parameters.
• High Reliability, SMD components.
• High Density, one channel, 2 trips per unit.
• Simplified installation using standard DIN Rail and plug-in terminal blocks.
• 250 Vrms (Um) max. voltage allowed to the instruments associated with the barrier.

Supply

12-24 Vdc nom (10 to 30 Vdc)

Channels

1

SIL level

SIL 2
D1054S - SIL 2 Repeater Power Supply and Trip Amplifiers

request a quotation

Download

    DTS0183 D1054S data sheet (English) (PDF 439 KB)
    ISM0067D1054S instruction manual (PDF 585 KB)
    ISM0102General D1000 Series Instruction Manual (PDF 2.39 MB)
    ISM0139UL Control Drawing for D1054S (PDF 133 KB)
    ISM0155General D1000 Series Safety Instruction Manual (PDF 3.35 MB)
    CRT005UL & C-UL barriers listing [link E222308] (PDF 227 KB)
    CRT007ATEX certificate n. Presafe 16ATEX8917 (I.S.) (PDF 489 KB)
    CRT014Metrological Certificate for D1000 Series (Russia) (PDF 779 KB)
    CRT020FM 3024643 (USA) & FM-C 3029921C (Canada) (PDF 3.42 MB)
    CRT028Korean Register Type Approval Certificate (PDF 577 KB)
    CRT033IECEx CoC for D1054S, D1061S, D1063S (I.S.) [link IECEx PRE 16.0084] (PDF 308 KB)
    CRT047ATEX certificate n. IMQ 09 ATEX 013 X (non-sparking) (PDF 160 KB)
    CRT125IECEx CoC for D1000 Series (non-sparking) [link IECEx IMQ 13.0011X] (PDF 60 KB)
    CRT142TÜV SIL Certificate Summary (PDF 919 KB)
    CRT162INMETRO Certificate DNV 13.0135 (PDF 531 KB)
    CRT179DNV Maritime Type Approval Certificate (D1000 Series) (PDF 2.06 MB)
    CRT192TRCU Certificate for D1000 Series (PDF 3.15 MB)
    CRT216Ukraine certificate for D1000 series (PDF 3.50 MB)
    APN0005D1052-53, D1072-73 Signal Converter DIN Rail (PDF 25 KB)
    APN0007Universal AC Power Supply for Series D1000 (PDF 44 KB)
    SWC1090D1000 and E1000 Software Configurator for Windows
    BUSPower Bus Optional Enclosure
    MCHP065Din Rail Anchor, for Terminal Block Side of Bus Power
    MOR016DIN Rail End Stopper Terminal Block
    MOR017Plug-in Terminal Block male, Horizontal Output, for Bus Power
    MOR022Plug-in Terminal Block female, Horizontal Output, for Bus Power
    PPC1090Pocket Portable Configurator for D105* D106* D107*
    PPC1092D1000 Series Serial Adapter Configurator.
    USBADAPTRS-232 to USB Adapter.
Are you interested in this product? Request a quotation, search for an expert in your area or contact us.

« Previous: D1053S
D1054S
Next: D1060S »