Series D1000

D1000 Galvanic Isolators Series Information

PDF Series Brochure - View all models



G.M. International Din-Rail mount Intrinsic Safety Galvanic Isolators provide the most simple and cost effective means of implementing Intrinsic Safety into your Hazardous Area applications.

High Packing Density

  • High channel density result from innovative circuit design using advanced surface mount components.
  • Ultra slim 4 channels 22,5 mm wide DIN rail mounting modules.
  • 6 mm per channel.
  • 176 I/O channels per meter of DIN rail.
  • Single, dual or quad channel models

High performance

  • High Signal transfer accuracy and repeatability.
  • Advanced circuitry provides low heat dissipation, ensuring modules run cool despite their high functionality
  • Low power consumption.
  • SMD manufacturing to maximize long, reliable life.

Wide Functionality

  • Wide Range of digital switch and analog I/O.
  • Relay contacts rated for 2 amp. to directly switch high loads.
  • Three port galvanic isolation to eliminate noise, ground loop problems and to provide Intrinsic Safety without a high integrity safety earth connection (necessary when using Zener Barriers).
  • Line Fault alarm detects open or short circuit of field cables



List of all available D1000 models

Features

  • Single channel versions available if required, to provide single loop integrity on Emergency Shut Down and Fire & Gas applications
  • Configure using DIP switch for easy field set up.
  • Microprocessor models configurable using Software or PPC1090 Pocket Portable Configurator.
  • LED indication for power, signal status and line fault conditions
  • 35 mm (Top Hat) DIN Rail
  • Plug-in screw terminal blocks to secure termination up to 2,5 mm2
  • Models accept DC power supply over a wide range (20-30 V) .
  • Wide operating temperature range.

Certifications and Approvals

  • Intrinsic Safety Certification to CENELEC according 94/9/EC (ATEX).
  • Meets European Directives for EMC. All modules carry CE mark
  • SIL 2 and SIL3 modules according standards IEC61508 and IEC61511
  • See the Certificates page for a complete listing
D1000 Models: