D1033Q

4 Ch, /Proximity Detector Repeater, Transistor Out, SIL 2

Descrizione

The Switch/Proximity Detector Repeater type D1033Q is a DIN Rail unit with four independent and isolated channels. The unit can be configured for contact or proximity detector, NO or NC and for NC or NO optocoupled open collector transistor output. Each channel enables a Safe Area load to be controlled by a switch, or a proximity detector, located in Hazardous Area.

Caratteristiche

• Input from Zone 0 (Zone 20), Division 1, installation in Zone 2, Division 2.
• NO/NC contact/proximity Detector Input.
• Four opto isolated voltage free transistorOutput Signals.
• Common negative or positive output both accepted in standard version D1033.
• Line fault detection with common signalling available when using Power Bus enclosure.
• Three port isolation, Input/Output/Supply.
• EMC Compatibility to EN61000-6-2, EN61000-6-4.
• In-field programmability by DIP Switch.
• High Reliability, SMD components.
• High Density, four channels per unit.
• Simplified installation using standard DIN Rail and plug-in terminal blocks.
• 250 Vrms (Um) max. voltage allowed to the instruments associated with the barrier.

Alimentazione

24 Vdc nom (20 to 30 Vdc)

Canali

4 (2 canali: D1033D)

Livello SIL

SIL 2
D1033Q - SIL 2 Switch/Proximity Detector Repeater Transistor Output

richiesta di quotazione

Download

    DTS0151 D1033Q specifiche (English) (PDF 337 KB)
    ISM0043D1033Q Istruzioni (PDF 687 KB)
    ISM0102General D1000 Series Instruction Manual (PDF 2.39 MB)
    ISM0131UL Control Drawing for D1033S, D1033D (PDF 126 KB)
    ISM0155General D1000 Series Safety Instruction Manual (PDF 3.35 MB)
    CRT003Certificato ATEX n. DMT 01 ATEX E 042 X (I.S.) (PDF 9.52 MB)
    CRT005UL & C-UL barriers listing [link E222308] (PDF 227 KB)
    CRT013Analisi EXIDA SIL2 SIL3 (03/07-24) (PDF 408 KB)
    CRT020FM 3024643 (USA) & FM-C 3029921C (Canada) (PDF 3.42 MB)
    CRT028Certificato Korean Register Type Approval (PDF 577 KB)
    CRT032CoC IECEx per serie D1000 (I.S.) [link IECEx BVS 07.0027X] (PDF 2.80 MB)
    CRT047Certificato ATEX n. IMQ 09 ATEX 013 X (non scintillante) (PDF 160 KB)
    CRT125CoC IECEx per serie D1000 (non scintillante) [link IECEx IMQ 13.0011X] (PDF 60 KB)
    CRT130TÜV SIL Functional Safety Certificate (PDF 65 KB)
    CRT143Certificato SIL emesso da TÜV - Sommario (PDF 495 KB)
    CRT175INMETRO Certificate DNV 13.0108X (PDF 843 KB)
    CRT179Certificato DNV per gli standard navali e offshore (serie D1000) (PDF 2.06 MB)
    CRT192TRCU Certificate for D1000 Series (PDF 3.15 MB)
    CRT216Ukraine certificate for D1000 series (PDF 3.50 MB)
    APN0007Universal AC Power Supply for Series D1000 (PDF 44 KB)
    APN0010Digital Unit Testing for D1000 Models (PDF 212 KB)
    BUSContenitore opzionale con alimentazione a Bus
    MCHP065Din Rail Anchor, for Terminal Block Side of Bus Power
    MOR016DIN Rail End Stopper Terminal Block
    MOR017Plug-in Terminal Block male, Horizontal Output, for Bus Power
    MOR022Plug-in Terminal Block female, Horizontal Output, for Bus Power
Siete interessati a questo prodotto? Richiesta di quotazione, ricerca esperti nella propria zona oppure contattateci.

« Previous: D1033D
D1033Q
Next: D1034D »